KIT6130: Top of the range Thermostatically controlled douche shower kit. Comprises of the chrome on ABS CTV6180, the worlds first and currently only shower head with ceramic core slider thumb valve,, high pressure anti-tangle hose, VAL2450 Auto prompt shut off valve and the TMV6200 pre-set thermostatic mixer To turn water on to shower head, remove shower from dock and turn dock vertically, to return shower to the dock it requires turning back to horizontal position thus turning off the water supply to the hose and shower. The flow of the water spray can be controlled precisely from a trickle to full flow with the ceramic thumb trigger, requires good thumb dexterity to operate
To view larger images and additional information, click on the image to the left which will the load main page where more detailed information is available.
KIT6130: Thermostatic Pre-set Warm Water Bidet Shower Kit with auto prompt shut off valve and shower head with ceramic core slider trigger.
Thermostatic Pre-set Warm Water Bidet Shower Kit. This kit provides absolute peace of mind against accidental leakages, the water is always off when the shower is docked in the valve. To turn water on to hose and shower the shower needs removing from the dock and the dock turned 90 degrees to the vertical position. After use to place the shower head back in the dock the valve dock needs turning back to the horizontal position thus closing the valve and shutting off the water supply.
The chrome on ABS CTV6180 Shower head is the worlds first and currently only shower head to utilise ceramic plates instead of rubber washers in the shower head trigger, it is also the first to employ a slider trigger which slices through the water as opposed to pushing against the water pressure when operating the trigger, this enable the water flow from the head to be precisely and accurately controlled from a trickle to full flow with ease no matter how strong the water pressure. The thumb valve requires a certain level of thumb dexterity, please view a short video demonstrating the precise level of flow control by clicking HERE.
Water temperature is pre-set to the desired operating temperature at the time of installation. The TMV6200 is factory set at 38C we recommend reducing this setting to 35C for bidet showers. The temperature is adjusted by removing the cap and turning the brass head screw in the required direction indicted by the coloured temperature markers Kit consists of the following parts.
- CTV6180 Mirror Chromed high Impact ABS shower head with high pressure ant- tangle hose.
- VAL2450 Auto prompt water shut off valve.
- TMV6200 Thermostatic Mixing Valve (not shown in main image)
- HOS-AT 1.2M stainless steel hose in chrome finish
- Water pressure: Requires minimum 0.3 bar water pressure,maximum 4.5 bar
This kit provides all the key parts your plumber will require to install this top quality suite at a discount price.
Please Note: The TMV6200 Thermostatic Mixing Valve is designed to be installed hidden from sight but must be left accessible for adjustment and future maintenance requirements. For full specification sheet, installation, commissioning and maintenance guidelines for the TMV6200 CLICK HERE
To view what comes in the box and to see basic installation guides click on the View Additional / Larger images under the picture to the left then click next on the large picture to view all of the additional images.
It is essential that your Bidet Sprayer is installed in compliance with the Water Regulations Advisory Service (WRAS) guidelines.If in any doubt please consult a qualified plumber.